Not sure which beginner pottery tools to buy first? Follow this staged shopping order so you spend on what matters and skip what you will not use yet.
Author Archives: The Kiln Depot
17
Oct
Oct
Trimming pottery turns a heavy thrown form into a light, finished piece. Learn the timing, setup and nine simple steps for a clean, even foot ring every time.
17
Oct
Oct
Throwing a cylinder is the core skill behind mugs, vases and bowls. Follow seven easy steps, then use the troubleshooting table to fix uneven walls.
16
Oct
Oct
Pottery wheel speed changes at every stage of throwing. Learn when to go fast, when to slow down, and how to control the pedal for cleaner pots.
16
Oct
Oct
Earthenware vs stoneware comes down to firing range, durability, glaze and what your kiln can reach. Here is how to choose the right clay for your studio.
15
Oct
Oct
Recycling clay saves money only when the batch comes out usable. Here are the seven mistakes that ruin reclaimed clay and how to avoid each one.
15
Oct
Oct
Wedging clay removes air and evens out moisture before you throw or build. Learn ram’s head, spiral and cut wedging, plus table height and safety tips.
14
Oct
Oct
Pinholes in glaze come from gas escaping during firing. Learn the real causes, from dusty bisque to thick glaze, and the firing fixes that heal the surface.
14
Oct
Oct
Glaze running leaves drips, puddles and stuck pots. Find out why glaze runs in the kiln, how to prevent it, and how to protect your shelves from damage.
13
Oct
Oct
A crazing glaze shows a web of fine cracks after firing. Learn why glaze fit fails, how to test for it, and the simple fixes that stop crazing for good.